Skip to content
Glossary

What Is Knob-and-Tube Wiring?

Knob-and-Tube Wiring is an older electrical wiring method that carries power through separate insulated conductors. Porcelain knobs support the wires, and porcelain tubes protect them where they pass through wood framing. The method appears in older homes and differs from modern cable that contains conductors within a shared outer jacket.

Quick Facts About Knob-and-Tube Wiring

Category
Older residential wiring method
Used for
Powering household circuits
Common confusion
Visible fittings don't prove a circuit is active
Also called
K&T Wiring
Often discussed with
Whole House Rewiring, Electrical Rewiring

Key Takeaways About Knob-and-Tube Wiring

  • The wiring typically lacks an equipment grounding conductor.
  • Existing wiring may be hidden behind walls or ceilings.
  • An old porcelain fitting doesn't prove the wiring still carries power.

How Knob-and-Tube Wiring Works

Two workers inspect an exposed electrical fixture under a wooden overhang outside a building

Knob-and-Tube Wiring carries current along a hot wire to a light or outlet. A separate neutral wire provides a return path. The wires follow paths through the house and connect to electrical devices.

Related glossary terms: Neutral Wire, Branch Circuit, Open Ground.

Air space around the wires helps them release heat. The porcelain supports hold the wires away from wood surfaces. The insulation on the wires can wear out as it ages.

Connections may exist inside walls, ceilings, or attic spaces. An older circuit may also connect to newer wiring added during a remodel. A visible section alone doesn't show the condition of the whole circuit or where every connection leads.

Hands use pliers to twist a black wire beside ceramic insulators on a wooden board

From the Center Electric Service team

When we plan whole house rewiring, we look at where the older wiring connects to the home's circuits. We also consider access through walls and ceilings. That helps us plan routes for replacement wiring and account for areas that may need repair.

Knob-and-Tube Wiring in Practice: A Real-World Example

A Riverside homeowner planning whole house rewiring finds old wiring near an attic light. The rewiring plan accounts for the light circuit and the route to its switch.

Related Terms

Neutral Wire

A neutral wire is a circuit conductor that carries current back toward the electrical supply during normal operation.

Branch Circuit

A branch circuit is the wiring that carries electricity from a circuit breaker or fuse to outlets, lights, or equipment.

Open Ground

An open ground is a break or missing connection in an outlet's equipment grounding path.

Junction Box

A junction box is an enclosure that holds electrical wire connections inside a building or other location.

Center Electric Service

Have Questions About Knob-and-Tube Wiring?

Contact Center Electric Service for practical guidance on Knob-and-Tube Wiring and related 24 hour electrician work in Riverside.

(951) 577-3540